Avtech AVH-HV1-C-P-OS Nanosecond Pulse Generator
We no longer offer this product. If you want repair service or a custom modern equivalent, contact us.
This is a Avtech AVH-HV1-C-P-OS Nanosecond Pulse Generator with user manual.
The Model AVH-HV1 is a low jitter high amplitude pulse generator featuring minimum pulse width of 1 ns, amplitudes from 0 to 100 volts, and pulse repetition frequencies from 100 Hz to 100 kHz.
The pulse repetition frequency is set by the internal clock oscillator which is controlled by a four position range switch and a one turn control. Amplitude is also controlled by a one turn control. Output polarity is positive.
A delay control and sync output is provided for sampling scope triggering purposes. The units can also be triggered externally using a TTL level pulse. The propagation delay in the externally triggered mode is typically 50 ns.
A DC offset or bias insertion option is provided. The circuit for this is similar to Model AVX-T at the output. The required DC offset or bias is applied directly to rear panel solder terminals.
Click Here to Download More Info
Click Here to Download Test Results
Specifications
Amplitude Range |
0 to 100 V |
|---|---|
Ambient Temperature Range |
0 to 50 °C |
Synchronization Connector |
BNC |
Trigger Connector |
BNC |
Offset Range |
±50 V |
Pulse Width |
1 ns |
Output Impedance |
50 Ω |
Rise Time |
10% |
Output Polarity |
Positive |
Frequency Range |
0 to 100 kHz |
AC Input Power |
120/240 V, 50/60 Hz |
Trigger Jitter |
±15 picoseconds |
Output Connector |
SMA |
CONTACT
JOIN US
ABOUT US